|Home||» Products||» Water Softening Plant||» Resin Base Water Softener|
We are know for quality installation as service. AquaShakti water softening products remove calcium and magnesium from hard water to produce softened water. A water softener uses sodium to help replace calcium and magnesium ions. Unlike hard water, softened water will not leave any residue or scale on things it comes in contact with..
We have two type model :- Manual & fully automatic.
Automatic regeneration takes place based on external signals like as Pump on timer or real time clock.
(A) Pump On timer : Pump on timer decides when the plant run full capacity is over & softener require regeneration. Regeneration starts after receiving signal from Aquashakti Panel which has multiple function like,
Inbuilt Starter panel
Pump ON timer : This sends signal to Auto MPV whenever pump starts. The balance time left for regeneration is constantly displayed on Auto MPV. When balance time reaches zero , the unit goes into regeneration automatically.
Level controller : The raw water pump automatically starts and stops based on level in product water tank. Additionally if raw water tank is empty the RWP switches OFF automatically.
Current overload protection and single phase protection protects the raw water pump from burnouts & prevents shutdowns.
Flow sensor : The Auto valve counts down the programmed output based on signal from flow sensor. When it reaches zero, the unit goes into regeneration automatically.
(B) Real time clock : -- Regeneration starts at the programmed time and day of the week and unit goes back into service on its own once the regeneration is over.
AQUASHAKTI WATER SOLUTION All Rights Reserved.